Ph.D Graduated

 

1) Maram Venkata Ramana (2008) 

Ph.D Title: Feasibility of Exploring Ultrasonic Flexural Waves as a Cooling Mechanism in Microelectronic Systems

Current Position: -

2) Maziar Ramezani (2009)

Ph.D Title: Modeling of Friction in Sheet Metal Working using the Finite Element Method

Current Position: Senior Lecturer at Auckland University of Technology, New Zealand

3) Farhad Bin Bahaideen (2010) 

Ph.D Title: Analysis of Friction at Piston Ring-cylinder Interface of Two-stroke Engine

Current Position: -

4) Ko Ying Hao (2012)  

Ph.D Title: Attenuation of Grass Trimmer Hande Vibration using Imposing Node Technique

Current Position: Senior Lecturer at TAR University College, Malaysia

5) Tan Wei Hong (2013)  

Ph.D Title: Application of Micro Perforated Panel in the Exhaust Muffler

Current Position: Senior Lecturer at Universiti Malaysia Perlis (UniMAP), Malaysia

6) Chuah Hun Guan (2013)

Ph.D Title: Analysis of Surface Roughness Effect on Microindentation

Current Position: Senior Lecturer at KDU University College, Malaysia

7) Tan Yeow Chong (2014)

Ph.D Title: Analysis of Piston Secondary Motion

Current Position: Senior Mechanical Design Engineer at Robert Bosch (M) Sdn. Bhd., Malaysia

8) Ooi Lu Ean (2014) 

Ph.D Title: Determination of Frequency Dependent Global Dynamic Properties of Engine Mount

Current Position: Senior Lecturer at Universiti Sains Malaysia (USM), Malaysia

9) Teoh Choe Yung (2015) 

Ph.D Title: Dither Effect of Drum Brake Squeal

Current Position: Senior Lecturer at TAR University College, Malaysia

10) Muhamad Najib Bin Abdul Hamid (2015)

Ph.D Title: Analysis of Drum Brake Squeal

Current Position: Senior Lecturer at Universiti Kuala Lumpur (UniKL-MSI), Malaysia

11) Ahmad Zhafran Bin Ahmad Mazlan (2016)

Ph.D Title: Active Vibration Control of Piezo Stack Actuator with Consideration to Hysteresis and Saturation Effects

Current Position: Senior Lecturer at Universiti Sains Malaysia (USM), Malaysia

12) Nurul Farhana Binti Mohd Yusof (2018)

Ph.D Title: Asperites Deformation in the Early Cycle of Rolling Contact

Current Position: Senior Lecturer at Universiti Sains Malaysia (USM), Malaysia

13) Chan Ping Yi (2018)

Ph.D Title: A Measurement System for Pathological Hand Tremor

Current Position: Senior Lecturer at Monash University, Malaysia

14) Yahaya Suleiman Abimbola (2021)

Ph.D Title: Biomechanical Comfort Analysis of Foot Orthosis

Current Position: Senior Lecturer at University of Ilorin, Nigeria

 

M.Sc Graduated

 

1) Ahmad Baharuddin Bin Abdullah (2002)

M.Sc Title: Development of Modular Electroplating Head

Current Position: Associate Professor at Universiti Sains Malaysia (USM), Malaysia

2) Tee Boon Hoo (2002)

M.Sc Title: Analysis of Precision Seal using the Finite Element Method

Current Position: Principle Staff Engineer at Motorola Solution, Malaysia

3) Chong Shah Leong (2002)

M.Sc Title: Analysis of Flow-induced Vibration using the Finite Element Method

Current Position: Field Engineering Manager at Technip, Malaysia 

4) Chua Beng Hui (2002)

M.Sc Title: Analysis of Self Energized Friction System

Current Position: Assistant Operation Manager at Hardyflex Industries Sdn. Bhd., Malaysia

5) Zahrul Bin Fuadi (2003)

M.Sc Title: Analysis of Motorcycle Drum Brake Squeal Using the Finite Element

Current Position: Senior Lecturer at Syiah Kuala University, Indonesia

6) Aziz Bin Mat Ali (2005)

M.Sc Title: Analysis and Development of Roselle Harvester

Current Position: -

7) Abdullah Aziz Bin Saad (2007)

M.Sc Title: Thermal Deformation Analysis of Electronic Package

Current Position: Associate Professor at Universiti Sains Malaysia (USM), Malaysia

8) Muhamad Najib Bin Abd Hamid (2007)

M.Sc Title: The Effect of Roundness on Brake Factor of a Motorcycle Drum Brake

Current Position: Senior Lecturer at Universiti Kuala Lumpur (UniKL-MSI), Malaysia

9) Mohamad Ezral Bin Baharudin (2007)

M.Sc Title: Design and Development of Automatic Tile Laying Machine

Current Position: Senior Lecturer at Universiti Malaysia Perlis (UniMAP), Malaysia

10) Ko Ying Hao (2008)

M.Sc Title: Investigation of Elastomeric Pad Attenuation of Hand-transmitted Vibration

Current Position: Senior Lecturer at TAR University College, Malaysia

11) Zainal Nazri Bin Abdul Aziz  (2009)

M.Sc Title: Drum Brake Squeal Analysis using the Finite Element Method - Pressure Effect

Current Position: Lecturer at Universiti Kuala Lumpur (UniKL-MSI), Malaysia

12) Alias Bin Ali (2010)

M.Sc Title: Analysis of Parameter Interaction in Development of Modular Platform

Current Position: -

13) Ooi Lu Ean (2010)

M.Sc Title: Dynamic Analysis of Engine Rubber Mount

Current Position: Senior Lecturer at Universiti Sains Malaysia (USM), Malaysia

14) Ali Bin Jamaludin (2011)

M.Sc Title: A Study on Oil Fuel Ratio on Two Stroke Engine Friction and Wear

Current Position: -

15) Nurul Farhana Binti Mohd Yusof (2012)

M.Sc Title: Surface Degradation of Cylindrical Roller Bearing

Current Position: Senior Lecturer at Universiti Sains Malaysia (USM), Malaysia

16) Ahmad Zhafran Bin Ahmad Mazlan (2012)

M.Sc Title: Active Vibration Contol to Attenuate Hand-arm Vibration for Orbital Sander

Current Position: Senior Lecturer at Universiti Sains Malaysia (USM), Malaysia

17) Mukhriz Bin Md. Mokhtar (2012)

M.Sc Title: Effect of Electroless Plating on Wear and Surface Friction of AlSi Cylinder Liner

Current Position: Assistant Manager at Continental Automotive Components Malaysia Sdn. Bhd., Malaysia

18) Andree Bin Ahmad (2014)

M.Sc Title: Vibration and Noise Analyses of Cylindrical Roller Bearing

Current Position: M&E Consultant at Pintar Juara Konsultant Sdn. Bhd., Malaysia

19) Mohd Khairul Rabani Bin Hashim  (2015)

M.Sc Title: Psychoacoustics Analysis of Two Ways Radio under Wind Noise

Current Position: Lecturer at Universiti Malaysia Perlis (UniMAP), Malaysia

20) Vigren A/L Radha (2016)

M.Sc Title: Suppression of Electromagnetic Acoustic Noise from Variable Speed Induction Motor by using Dynamic Vibration Absorber 

Current Position: Engineer at Dyson Manufacturing Sdn. Bhd., Malaysia

21) Wan Masrurah Binti Hairudin (2016)

M.Sc Title: Development of Low Frequency Energy Harvester

Current Position: PhD Candidate at Universiti Sains Malaysia (USM), Malaysia

22) Mohamad Izudin Bin Alisah (2016)

M.Sc Title: Development of Self-powered Circuit for Vibration Energy Harvesting

Current Position:  PhD Candidate at Universiti Sains Malaysia (USM), Malaysia

23) Ummi Masyitah Binti Mohd Fisol (2016)

M.Sc Title: Experimental and Computational Fluid Dynamic of Wind-induced Noise in Two Ways Radio 

Current Position: Part Time Lecturer at Universiti Teknologi Malaysia (UiTM), Malaysia

24) Mohd Hafiz Bin Abdul Satar (2019)

M.Sc Title: Characterization of Piezoelectric Patch and Its Application to the Active Vibration Suppression for Cantilever Beam

Current Position: PhD Candidate at Universiti Sains Malaysia (USM), Malaysia

25) Mohamad Hazwan Bin Mohd Ghazali (2019)

M.Sc Title: Vibration Analysis of Chenderoh Dam Structure due to the Effects of Water Spilling and Surging 

Current Position: PhD Candidate at Universiti Sains Malaysia (USM), Malaysia

26) Nur Arafah Binti Jafar (2020)

M.Sc Title: Empirical End Correction Factor For 3D Printed Micro Perforated Panel

Current Position: Engineer at Dyson Manufacturing Sdn. Bhd., Malaysia

27) Azizi Bin Arbain (2020)

M.Sc Title: Vibration Analysis of Kenyir Dam Ungated Spillway with Consideration to Energy Dissipater Effect using Numerical Simulation

Current Position: Engineer at Intel Corporation, Malaysia

28) Nabil Bin Mohamad Usamah (2020)

M.Sc Title: Attenuation of Motorcycle Handle Vibration using Dynamic Vibration Absorber

Current Position: Design Engineer at R3KA Resouces, Malaysia

29) Mohamad Syazwan Bin Md Isa (2021)

M.Sc Title: Vibration Attenuation Of The Small Scale Boat Engine Handle Using Dynamic Vibration Absorber

Current Position: Research Assistant at Universiti Sains Malaysia (USM), Malaysia